Industrial, Commercial and Domestic. 

Supply, Fit, Repair and Service

Industrial Roller Doors​

Specifications

 

Roller shutter doors supplied and fit by RF Doors are of a lasting, robust and visually pleasing design, with security being a top priority.

 

Basic specifications:

 

  • 75mm x 50mm x 5mm Galvanised Angle

  • 75mm scrolled Galvanised lath, 20Swg 0.9mm

  • T section bottom rail

  • 65mm Galvanished guide

 

Polyester powder coating available (British Standard or RAL) Prices vary.

Doors can also be ordered with punched/perforated laff and full hoods/fascias.

Security

 

The roller shutter doors we provide are of a high quality and always fit with security in mind, using secure fixings at multiple key points. This makes them a highly effective barrier against would-be intruders.

 

We always assess the security requirements in respect to the application of the roller shutter. From there we can determine any potential points of weakness that may need to be strengthened using further measures outlined below.

 

Optional security extras also available: 

 

  • Thicker 18 gauge curtain,

  • Bullet locks / Centre locks / Ground locks

 

 

Operation

 

Roller shutter doors can be made to operate either manually or with a motor.   A hand chain counterbalanced with a tensioned spring for manual.

Or motorised using either a (single phase 240V) tubular motor or a (3 phase 400V) direct drive or chain driver fit with anti-fall safety breaks.

 

Optional extras which can improve operation and performance are:

 

  • Fully Insulated doors

  • Remote control operation when safety edges and photocell are fitted

  • Heavy duty bottom rubber weather seal

  • 100mm Soffit brush strip (bird and draft control)

  • Guide brush seals

  • Wind lock guide 65mm or 100mm

 

 

For a free, no obligation survey and quote on any of the products advertised please don't hesitate to contact us using the details provided at the top of the page. Or if you prefer, send us an email via the contacts page.